Disassembling The Keyboard - Technogym Bikerace Service Maintenance Manual

BIKERACE: Service & Maintenance Manual - rev. 1.1

7.4. DISASSEMBLING THE KEYBOARD

Figure 7.4-1
Figure 7.4-2
Figure 7.4-3
1. Turn off the machine and unplug the mains
lead from the wall outlet.
2. Back off the 4 fixing screws a of the
protective cover using a small Philips
screwdriver.
3. Remove the protective cover.
Carry out the procedures described in paragraph
7.1. "Disassembling the display".
With the display placed on a work bench:
4. Back off the 13 screws b, using a small
Philips screwdriver.
5. Pushing against the screw studs with a
pointed tool, use a flat-blade screwdriver to
separate outer housing c from the keyboard –
electronic circuit boards group d.
6. Disconnect the cardio receiver cable from the
connector.
Continued on the following page →
Page 7.5