6.1. THE DISPLAY DOES NOT ILLUMINATE
This error occurs when the supply voltage fails to reach the display.
THE DISPLAY
DOES NOT
ILLUMINATE
Are the fuses OK?
Is the mains lead OK?
Does the wall output supply the
correct voltage?
Is the mains voltage present at
the power supply input?
A
Continued on the following page.
Page 6.2
NO
YES
NO
YES
NO
YES
1
NO
YES
BIKERACE: Service & Maintenance Manual - rev. 1.1
Replace the blown
fuses
Replace the mains lead
Connect machine to a
suitable
electrical output
Is the mains voltage present
at the output of the power
input socket?
Replace the input
NO
socket / on-off
switch block of the
machine
2
Replace cable BK-3
YES