The Heart Rate Signal Is Incorrect - Technogym Bikerace Service Maintenance Manual

BIKERACE: Service & Maintenance Manual - rev. 1.1

6.8. THE HEART RATE SIGNAL IS INCORRECT

The machine displays this message when the receiver is disturbed by electromagnetic noise in the
surrounding environment. In some cases, the machine may show the message "Err" on the heart rate
display.
Continued on the following page.
THE HEART RATE
SIGNAL IS
INCORRECT
Is the minimum distance
between machines OK?
YES
Is the receiver positioned
correctly, and are the
connecting cables correctly
routed?
YES
If the TGS is present, is the
TGSRN2RACE cable correctly
routed?
YES
1
Are there sources of
electromagnetic noise near
the receiver?
NO
A
NO
Move the machines to
the minimum distance:
see paragraph 5.1.
NO
Position the receiver and
the cable correctly: see
paragraph 11.1
NO
Correctly route the cable:
see paragraph 11.1.
Move the machine away
YES
from the electromagnetic
source or attenuate the
power of the noise: see
paragraph 11.1.
Page 6.15