Connection With Plastic Flue Pipe (Pps) To A Moisture-Resistant Chimney (Mr Chim Ney, Negative Pressure) - Viessmann VITOCROSSAL 200 Type CM2 Technical Manual

Design information
Connection with plastic flue pipe (PPs) to a moisture-resistant chimney (MR chimney, negative pressure)
8
A Adaptor
B Flue gas
C Secondary ventilation
The Vitocrossal condensing boilers may be connected to a moisture-
resistant chimney if the chimney manufacturer can provide a calcula-
ted verification to EN 13384.
A flue pipe that is pressure sealed, moisture-resistant and approved
by the building inspectorate should be used as the connection piece.
This adaptor from the flue pipe to the MR chimney is available,
for example, from Plewa individually on request or from Schiedel by
quoting reference "Schiedel Steck-Adaptor".
VIESMANN
44
(cont.)
B
C
Plug-in adaptor by Schiedel
E
D
A
C
or Plewa adaptor
D MR chimney
E Inspection port
Addresses:
Plewa-Werke GmbH
D-54662 Speicher/Eifel
Wienerberger GmbH
Oldenburger Allee 26
D-30659 Hannover
Schiedel GmbH & Co.
Hauptverwaltung
Lerchenstrasse 9
D-80995 Munich
Gas condensing boilers