Advertisement
(Changing
the programmed
details)
1. Press the MEMORY switch
in the stop mode and
display the part of the programme
which
is to be
changed.
2. Select the new disc and its track.
3. Press the MEMORY switch.
Note:
Programmed
details cannot be partially deleted or in-
serted.
Operations
during programmed
play
- When the
!44 or PM switch
is used, skip play is
possible following the programmed
sequence. (Tracks
cannot be selected
directly
using the O-9 and +10
switches.)
If the search function
is used during
programmed
play and the end or beginning
of the current track is
reached, the unit enters pause mode.
Disco party function
During CD play, taped sound will be heard automatically
instead of CD when accessing
track or changing
disc or
when CD sound is interrupted
at the between tracks.
Load the cassette tape(s) to be played.
Z. Select "CD" as the function.
3. Press the DISCO PARTY switch. The DISCO PARTY
indicator
lights. (This switch can be pressed during
CD play.)
4. Press the PLAY/PAUSE
switch. Tape playback
oc-
curs during access to the CD track to be played first,
and then CD play starts.
(If no cassette tape is loaded,
"TUNER"
function
is
selected
during
access to the CD track, but radio
sound will not be heard.)
- To stop disco party function,
press the STOP switch
of CD player.
-
Forrecording
indiscopartyfunction,
pressthe DISCO
PARTY switch in stop mode, and press the COM-
PUTER REC switch.
In this case, tape will not be
played. So CD tracks will be continuously
recorded
without unrecorded
blanks between tracks.
_.
BEFORE TAPE OPERATION
Types of usable tapes
The type of tape used is automatically
identified
by the
system since decks 1 and 2 both employ an auto tape
selection system. The following
2 types of tape can be
used with this system.
Normal
.
Cr02
Note:
- Cr02 tapes without
sensing
holes cannot be used
since they cannot be identified
by the auto selector.
-
Endless tapes cannot be used.
-
If a tape with one of its tabs already
broken out is
recorded, the tape will not be reversed automatically,
and it will stop.
-
Do not use C-120 tapes. They may jam the head
section.
a
Accidental
erasure
prevention
tabs (for protecting
valuable recordings)
Accidental
erasure can be prevented
by breaking
out
the tabs on the end of the cassette tape (where the tape
is not exposed) using a screwdriver
or similar implement
(Fig. 12),
If a tab is broken out in error and you wish to re-record
the tape, simply block up the tab hole using cellophane
tape and the tape can be used for recording
again.
Dolby NR system
Dolby Noise Reduction
circuitry
provides
superior
re-
cording and playback
results by suppressing
tape hiss
by up to 10 dB for virtually noise free recordings.
Dolby noise reduction
manufactured
under license from
Dolby Laboratories
Licensing
Corporation.
"DOLBY"
and the double-D
symbol
0
are trademarks
of Dolby Laboratories
Licensing
Corporation.
LISTENING TO TAPES
Deck 1 is for playback only; deck 2 is for both playback
and recording.
Both are auto reverse decks.
1.
2.
3.
4,
5.
6.
Press the EJECT button to open the cassette holder.
Load the cassette tape.
To load, place the tape with its exposed
end at the
bottom.
After the tape has been loaded,
push the
cassette holder back into position.
Both
4 and
indicators
light, and 1 or 2 DECK
indicator lights.
Set the DOLBY NR switch to ON or OFF according
to
whether the tape has been recorded
with the Dolby
NR system or not.
Select the deck 1 or deck 2 by pressing
the DECK
select switch if required.
Playback commences
when the PIAY
or 4 PLAY
switch is pressed.
The selected
or <
indicator
remains lit.
Press the STOP switch to stop playback
at any time.
When the end of the tape has been reached,
the
automatic stop or automatic reverse will be activated.
Auto reverse
In both decks 1 and 2 tapes can be played back in the
following 3 ways using the MODE switch.
—.
—.
For listening to one side of the tape only.
2:
For listening to both sides of the tape in succession.
However,
if playback
has been started from the re-
verse side, only the reverse side will be played back.
rJ
:
For listening repeatedly
to both sides of the tape.
-14-
Advertisement
