DC-MP9500 INSTRUCTION MANUAL Micro Component System REMO E CONTRO LER RB MP 0 0...
PRECAUTIONS CAUTION THIS PRODUCT CONTAINS A LOW POWER LASER DEVICE. TO ENSURE CONTINUED SAFETY DO NOT REMOVE ANY COVERS OR ATTEMPT TO GAIN ACCESS TO THE INSIDE OF THE PROD- UCT. REFER ALL SERVICING TO QUALIFIED PERSONNEL. CLASS 1 LASER PRODUCT LUOKAN 1 LASERLAITE CAUTION R SK OF ELECTRIC SHOCK...
CONNECTIONS L ch speaker R ch speaker FM Aerial AM loop Aerial LOOP LEFT RIGHT SPEAKE LEFT (6Ω M PHONES L NE IN RIGHT RESET To an AC outlet Video/Auxiliary equipment Note: Unwind the aerial wires, then connect them Do not connect the mains lead to an AC outlet until all connections to the AM LOOP terminals.
ADJUSTING THE CLOCK (Main unit only) Example: To set “6:30”. 6. Press the MEMORY button to finish Turn the power off before setting. If this is the first time for setting, “0:00” all settings and the clock starts. display blinks. 1.
CD PLAY Use compact discs bearing the symbol shown. In The number buttons on the remote control can also be used for skip addition to conventional 12 cm CDs, this system can play. To skip to track 6 while one track is playing, press 0, then 6 (for be used to play 8 cm CDs without an adapter.
Changing a programme To add a new track to a programme 1. In the stop mode, press the MEMORY button repeatedly till To change a track “-- -- -- -- . -- --” appears. 1. In the stop mode, press the MEMORY button repeatedly until the track 2.
LISTENING TO THE RADIO Before use Manual presetting 1. Tune in the station to be preset as described above. When the unit is shipped from the factory, its AM frequency band is set as 2. Press the MEMORY button. “PRO- “522 ~ 1611 kHz (in 9 kHz steps)”.
TIMER OPERATION 10. Press the z/ON button to switch off Using the timer the power. Set the on and off times, and function to be used. Operation will start with the selected function at the on time. “ ”remains light. The power will be switched off at the off time.
SPECIFICATIONS CD player Power requirement: Type: AC 230V, 50Hz 2-channel stereo Power consumption: Pick-up: 70 W Optical 3-beam semiconductor laser Dimensions: Laser output: 165(W) x 205(H) x 305(D) mm 0.6mW (Maximum continuous wave) Weight: Wave length: 4.5kg 790nm Wow/flutter: Speaker systems Below measurable limits Type: Bass reflex...
Sanyo dealer. He will be pleased to give you a quotation for 4. Failure due to fair wear and tear of any item, such as batteries, the repair.