Advertisement
Do not rotate or stop the carousel by hand. If you do
so accidently, the carousel may not stop at the correct
position. If it is occurs, carefully set the carousel to the
correct position by hand as shown in Fig, 11.
Take out the disc(s) from the disc table before moving
the unit.
Do not touch the, disc table while it is automatically
moving. If your finger or any object should get caught
in the disc table, press the OPEN/CLOSE
switch. The
disc table will move in reverse direction.
The DISC SKIP, disc select or SKIPASEARCH switch
may not function immediately after the carousel turned.
Playing discs
1. Press a disc select (DISC 1, 2, 3 or 4) switch which
corresponds
to the tray number
of the disc to be
played first.
2. Press the PIAY/PAUSE
switch. Play starts from the
first track. "PIAY"
appears on the CD display, and the
current
disc number,
track number,
index number
and elapsed play times for each track are indicated.
The whole number of tracks on the disc is also dis-
played.
-
If the disc contains 21 or more tracks,"
" appears
-.
on the right of the "20" indication.
Play will also commence
if the disc table is ex-
tended.
3. Play will be interrupted
when the STOP switch
is
pressed, and the stop mode is established.
The disc
number, total number of tracks and total play time of
the disc which has been played are indicated.
4. When the last track of the last disc has been played,
the stop mode is established.
Note:
A disc cannot be played if it is installed bottom side
up. If it is installed in this way, "no dlSC" appears.
-
It may not be possible to play a disc if its surface is
marred by scratches,
fingerprints
or dirt.
Temporarily
stopping play
When the PiAY/PAUSE
switch
is pressed,
"PAUSE"
appears on the display, and play is temporarily
stopped.
resume play, press the switch again.
--
Direct track selection function
Play can be started immediately from the desired track of
disc(s) loaded by operating
the remote controller.
While a disc is being
played,
it is possible
to switch
immediately
to a particular track of disc(s).
Proceed with the operation
after the CD 10KEY switch
has been pressed.
First display the desired
disc number
in DISC on the
display by pressing
the DISC SKIP switch repeatedly.
Then
Examples:
To play from the track 3 on the disc, press switch 3.
To play from the track 10, press +10 and then O.
To play from the track 15, press +10 and then 5.
-
[f the disc only is selected, play will start from the first
track of the selected disc.
-
If a track number higher than the last track on the disc
is selected, the last track will be played.
The track number can be assigned
using the 144 or
N
switch and play started
by pressing
the
E/11
switch. These operations
can also be performed
us-
ing the corresponding
switches on the main unit.
Skip play function
To skip, for instance,
to track 6 while track 3 is being
played, press the
-/
WI
SKIP/SEARCH
switch until
"6" is displayed
in TRACK on the display. Play will now
skip to track 6.
Alternatively,
to skip back to track 3 while track 6 is being
played,
press the w/*
SKIP/SEARCH
switch until
"3" is displayed,
When the skip function
is used in the pause mode,
play will skip to the start of the track and then it will
pause.
It is possible to skip to a particular track on the other
disc(s) in "REPEAT CONTINUE"
mode.
Search (forwards/backwards)
function
If either the ~/H
or w/44
SKIP/SEARCH
switch is
pressed during play, the playerwill search at high speed
in the forward
or reverse direction
while the switch is
being pressed.
When the switch is released,
play will
begin again at that point.
While the switch is kept depressed,
the sound will be
heard at reduced volume during searching.
If search is performed
during
pause, the player will
return to pause when that switch is released.
In the forward direction,
searching
is possible
even
disc to disc except in "REPEAT ALL" mode.
Operation
will be placed
in the pause mode when
backward
searching
arrives at the start of the first
track on the disc which is being played.
Intro function
When the INTRO switch
on the remote
controller
is
pressed, "INTRO" appears on the display and about 10
seconds
of the start of each track will be played. The
intro play is possible
even disc to disc in continuous
repeat play mode.
When the INTRO switch is pressed again during intro
play, the track whose intro is being played and the
subsequent
tracks will be played through
normally.
When the INTRO switch
is pressed
during
normal
play, the intros of the following
tracks will be played,
- Skip play is possible
using either the
w
or N
switch during intro play, (Play is possible even if the O
to 9 and +10 switches are employed.)
The direct play mode is established
even when a
function other than CD has been previously selected.
Intro random play
Press the RANDOM switch after the INTRO switch has
been pressed.
Random function (automatic programmed
play by micro-
computer)
When the RANDOM switch on the remote controller
is
pressed,
"RANDOM"
appears
and the tracks
on the
discs will be played
automatically
at random
by the
microcomputer.
-12-
Advertisement
