Radio Data System Tuning; Displaying The Radio Data System Information; Selecting The Radio Data System Program Type (Pty Seek) - Yamaha RX-V2065 Owner's Manual

Radio Data System is a data transmission system used by FM stations in many countries. This unit can receive various
Radio Data System data such as "Program Service", "Program Type", "Radio Text", "Clock Time" and "EON"
(enhanced other networks) when receiving Radio Data System broadcasting stations.
Note
• The Radio Data System reception feature is only available in U.K., Europe and Russia models.
Displaying the Radio Data System
information
You can display the 4 types of the Radio Data System
information ("Program Service", "Program Type", "Radio
Text" and "Clock Time") in the front panel display.
1
Tune into the desired Radio Data System
broadcasting station.
• Frequency tuning (page 31)
• Preset tuning (page 32)
y
• You can also use the PTY Seek mode to tune into the desired Radio
Data System broadcasting station from the preset ones.
2
Press EINFO (or fINFO) repeatedly to
toggle the following Radio Data System
information display modes.
Program Service
Program service name, frequency
Program Type
Program type, frequency
Radio Text
Radio text, frequency
Clock Time
Clock time, frequency
DSP Program
Current sound field program (page 27), frequency
Audio Decoder
Current audio decoder (page 29), frequency

Radio Data System tuning

Frequency
Frequency, preset number (if the selected station is
preset)
Display example (Program Type)
Selecting the Radio Data System
program type (PTY Seek)
You can select the desired radio program by program type
from the all preset Radio Data System broadcasting
stations.
y
• To select a radio program using PTY Seek, you must first register the
Radio Data System stations (page 31). "No Presets" or "No Presets in
Memory" is displayed if no stations are registered.
• You can also operate PTY Seek using the GUI screen.
1
2
3
Back to "Program Service"
SPORT
Rotate the TINPUT selector (or press
dTUNER) to select "TUNER" as the input
source.
Press sOPTION on the remote control.
The Option menu for "TUNER" is displayed
(page 43).
Press jCursor k / n to select "PTY Seek"
and then press jENTER.
33
En