Lowrance HDS Carbon Installation Manual page 64

Remote controllers
When a wireless device is connected, it should appear in the
Remote controllers list.
Selecting Always allow means the device can automatically
connect without needing a password each time. This menu also
allows disconnection of devices that no longer require access.
Wireless devices
This dialog shows the internal wireless and any connected WIFI-1
devices, as well as their IP and channel number. Selecting the
internal wireless or a WIFI-1 device provides additional detail.
To view and change internal wireless detail values (Network name
(SSID), Network key, or Channel) the internal wireless must be in
Access Point (Internal Wifi) mode. To select a network (hotspot) to
connect to, the internal wireless must be in Client Mode.
Network Name (SSID)
Displays the name of the internal wireless network.
64
Software Setup | HDS Carbon Installation Manual