Tool Menu; Asus Ez Flash 2 Utility; Asus Spd Information - Viglen VIG820S User Manual

4.11 Tool Menu

The Tools menu items allow you to configure options for special functions. Select an item then press
<Enter> to display the submenu.
Figure 36: Tool menu

4.11.1 ASUS EZ Flash 2 Utility

Allows you to run ASUS EZ Flash 2. Press [Enter] to launch the ASUS EZ Flash 2 screen.
4.11.2 ASUS O.C. Profile
This item allows you to store or load multiple BIOS settings.
The Setup Profile Status items show Not Installed if no profile is created.
Save to Profile
Allows you to save the current BIOS settings to the BIOS Flash, and create a profile. Key in a profile
number from one to eight, press <Enter>, and then select Yes.
Load from Profile
Allows you to load the previous BIOS settings saved in the BIOS Flash. Key in the profile number that
saved your CMOS settings, press <Enter>, and then select Yes.
DO NOT shut down or reset the system while updating the BIOS to prevent the system boot failure!
Load/Save Profile from/to USB Drive
Allows you to load/save CMOS profile from/to USB drive.

4.11.3 ASUS SPD Information

DIMM Slot Number [DIMM_A1]
Displays the Serial Presence Detect (SPD) information of the DIMM module installed on the selected slot.
Configuration options: [DIMM_A1] [DIMM_A2] [DIMM_B1] [DIMM_B2]
72
V1.0 Vig820S Motherboard Manual