Lan Subsystem - Viglen VIG820S User Manual

LAN Subsystem

The ethernet controllers support the following features:
•
10/100/1000 BASE-T IEEE 802.3 compliant
RJ-45 LAN Connector LEDs
The two LEDs are built into the RJ-45 LAN connector located on the back panel. These
LEDs indicate the status of the LAN as shown in Table 1.
Table 1: LAN LED Status
LED LED Colour
Link Green
Data Green/yellow
rate
V1.0
Item Description
A Link/Activity LED (Green)
B Link Speed LED (Orange/Yellow)
Figure 2: LAN Connector LED Locations
LED State Description
Off LAN activity is occurring.
On LAN link is established.
Blinking LAN activity is occurring.
10 Mb/s data rate is selected.
100 Mb/s data rate is selected.
1000 Mb/s data rate is selected.
Vig820S Motherboard Manual
10