Ricoh PRO C751 Troubleshooting Manual page 22

1. When the Machine Does Not Operate As Wanted
Problem
Misfeeds occur when
printing to envelopes.
1
Misfeeds occur when
printing to envelopes.
When printing to envelopes,
the envelopes may be fed in
together, or the envelopes
may not be fed.
20
Causes
The envelopes are curled.
You printed envelopes with
a non-rectangular flap when
[Skew Detection] was set to
[On].
The envelopes are curled.
Solutions
• Make sure you fully flatten curled
envelopes before you load them.
Do not stack envelopes over the
limit mark on the paper tray.
• If misfeeds still occur after the
envelopes have been flattened,
load envelopes on the Wide LCT
one at a time and print them
individually.
• For details about how to load
envelopes, see "Envelopes",
About This Machine
• Make sure you set [Skew
Detection] to [Off] when printing
envelopes with a non-rectangular
flap.
• For details about setting of skew
detection, see "Adjustment
Settings for Operators", Network
and System Settings Reference
.
• Make sure you fully flatten curled
envelopes before you load them.
Do not stack envelopes over the
limit mark on the paper tray.
• If misfeeds still occur after the
envelopes have been flattened,
load envelopes on the Wide LCT
one at a time and print them
individually.
• For details about how to load
envelopes, see "Envelopes",
About This Machine
.
.