Ricoh PRO C751 Troubleshooting Manual page 21

Problem
Original images are printed
on the reverse side of the
paper.
Misfeeds occur frequently.
Misfeeds occur frequently.
Misfeeds occur frequently.
Misfeeds occur frequently.
Causes
You may have loaded the
paper incorrectly.
The side or end fences of the
paper trays may not be set
properly.
Paper of undetectable size
has been loaded.
There is a foreign object on
the finisher tray.
The staple cartridge is not
set correctly.
When You Have Problems Operating the Machine
Solutions
Load paper correctly. Load paper into
the paper tray with the print side down.
Load paper into the Wide LCT or multi
bypass tray with the print side up.
• Remove misfed paper. For details,
see p.37 "Removing Jammed
Paper".
• Check the side or end fences are
set properly. Also, check the side
fences are locked. For details, see
"Changing the Paper Size", About
This Machine .
• Remove misfed paper. For details,
see p.37 "Removing Jammed
Paper".
• When paper is loaded which
cannot be detected automatically,
the user must set the paper size on
the display panel. For details, see
"Changing to a Size That Is Not
Automatically Detected", About
This Machine .
• Remove misfed paper. For details,
see p.37 "Removing Jammed
Paper".
• Do not place anything on the
finisher tray. It may cause a paper
jam.
Set the staple cartridge properly. The
Booklet Finisher SR5040 requires the
saddle stitch staple cartridge. For
details about how to add staples, see
"Adding Staples", About This Machine
.
1
19