When You Have Problems Operating The Machine - Ricoh PRO C751 Troubleshooting Manual

When You Have Problems Operating the
Machine
This section describes common problems and messages. If other messages appear, follow the
instructions displayed.
Problem
The operation switch
indicator continues blinking
and does not turn off when
pressed.
The display is off.
The display is off.
Nothing happens when the
operation switch is turned
on.
"Please wait." appears.
"Please wait." appears.
Causes
This occurs in the following
cases:
• The machine is
communicating with
external equipment.
• The hard disk is active.
• The machine is cooling
down.
The machine is in Energy
Saver mode.
The operation switch is
turned off.
The main power switch is
turned off.
This message appears when
you turn on the operation
switch.
This message appears when
the machine is warming up.

When You Have Problems Operating the Machine

Solutions
Check if the machine is communicating
with external equipment.
Press the [Energy Saver] key to cancel
Energy Saver mode.
Turn on the operation switch.
Turn on the main power switch.
Wait for a while. If the machine does
not get ready in two minutes, contact
your service representative.
• Wait for a while. If the machine
does not get ready in 10 minutes,
contact your service
representative.
• Wait until the message
disappears. Do not turn off the
main power switch while the
message is showing.
1
17