Using The Lcd Panel - Check Point 15000 Getting Started Manual

Using the LCD Panel

The appliance has an LCD panel that you can use to do these basic management
operations:
•
Configure the management IP address, netmask, and default gateway of the
appliance
•
Reboot the appliance
• Enter the boot menu for additional management options such as HW Diagnostics,
revert to snapshot, and reset factory defaults
For more information, see the
Menu Options
Menu Sub-menu
Network
Set Mgmt IP
Set Netmask
Set Default GW
System
Reboot
LCD Panel Buttons
To
Enter the main menu
Navigate the menu
Change a number
Select a menu option
Gaia Administration Guide
Purpose
Set the management interface IP address.
Set the management interface Netmask.
Set the management interface default gateway.
Reboot the appliance.
Press
Any button, other than
or
or
Check Point 15000 and 23000 Appliances Getting Started Guide
15000 / 23000 Appliances Hardware
for your version.
| 41