Initial Configuration; Creating The Network Object; Advanced Configuration - Check Point 15000 Getting Started Manual

Configuring 15000 / 23000 Appliances

Initial Configuration

Configure the appliance with the First Time Configuration Wizard. See the
and Upgrade Guide for Gaia Platforms
Note: The Installation and Upgrade Guides are released only for major versions. For
example, for the Gaia platform R77.30 version, see the R77 Versions
Upgrade Guide for Gaia Platforms
Go to the Installing Security Gateways on Appliances section, and see the instructions
to use the First Time Configuration Wizard.

Creating the Network Object

Configure the 15000 / 23000 Appliances object as a Security Gateway object in the
Security Management Server database.
1. Open SmartDashboard.
2. Configure a new gateway object for the appliance.
3. Enter the IP address for the appliance.
4. For a centrally managed deployment, create Secure Internal Communication (SIC)
between the Security Gateway and the Security Management Server. Enter the
activation key you used in the First Time Configuration Wizard.
5. Configure the topology.
6. Install the security policy.

Advanced Configuration

You can configure advanced options on Gaia from the WebUI or the CLI.
32 | Check Point 15000 and 23000 Appliances Getting Started Guide
related to the software version.
.
Installation
Installation and