Clock Functions - AEG BCS551020M User Manual

6. CLOCK FUNCTIONS

6.1 Clock functions table
Clock function
00:00
6.2 Setting and changing the
time
After the first connection to the mains,
wait until the display shows
"12:00". "12" flashes.
1. Press
2. Press
the minutes.
The display shows
hour. "00" flashes.
3. Press
minutes.
4. Press
day will be saved automatically after
5 seconds.
The display shows the new time.
To change the time of day press
again and again until the indicator for the
time of day
TIME OF DAY
DURATION
END
TIME DELAY
MINUTE MINDER
COUNT UP TIMER
and
or to set the hours.
to confirm and switch to set
and the set
or to set the current
to confirm or the set time of
flashes in the display.
Application
To show or change the time of day. You can change the
time of day only when the appliance is off.
To set how long the appliance operates. Use only when
an oven function is set.
To set when the appliance deactivates. Use only when
an oven function is set.
Combination of DURATION and END function.
Use to set a countdown time. This function has no ef-
fect on the operation of the appliance. You can set the
MINUTE MINDER at any time, also if the appliance is
off.
If you do not set any other clock function the COUNT
UP TIMER automatically monitor how long the appli-
ance operates.
It is on immediately when the oven starts to heat.
The Count Up Timer cannot be used with the functions:
DURATION, END.
6.3 Setting the DURATION
1. Set an oven function.
2. Press
starts to flash.
3. Press
the hours for DURATION time.
4. Press
When the time ends an acoustic signal
sounds for 2 minutes.
setting flash in the display. The appliance
deactivates automatically.
5. Press any button to stop the acoustic
signal.
6. Turn the knob for the oven functions
to the off position.
6.4 Setting the END
1. Set an oven function.
2. Press
starts to flash.
3. Press
the minutes for END time.
ENGLISH
again and again until
or to set the minutes and
to confirm.
and time
again and again until
or to set the hours and
11