Installation; Mounting The Transmitter; Figure 1: Mounting Brackets - Honeywell ST 800 Quick Start Installation Manual

SmartLine Pressure Transmitter

INSTALLATION

Evaluate the site selected for the Transmitter installation with respect to the process
system design specifications and Honeywell's published performance characteristics
for your particular model.
Temperature extremes can affect display quality. The display can become unreadable
at temperature extremes; however, this is only a temporary condition. The display will
again be readable when temperatures return to within operable limits.

MOUNTING THE TRANSMITTER

Transmitter models, except flush mounts and those with integral flanges, can be
attached to a two-inch (50 millimeter) vertical or horizontal pipe using Honeywell's
optional angle or flat mounting bracket; alternately you can use your own bracket.
Flush-mount models are attached directly to a process pipe or tank by a one-inch weld
nipple. Models with integral flanges are supported by the flange connection.
Typical Bracket mounted and Flange Mounted Installations

Figure 1: Mounting Brackets

December 2016 Quick Start Installation Guide 3