Table of Contents
Advertisement
:: Seite 23 von 64 :: Datenblatt zum Produkt Cisco CISCO VC020 Kameragehaeuse fuer Cisco SB Kamera PVC2300 mit DC# 599647 ::
Accessory Installation Processes
Installing the PVC2300/WVC2300 Cameras in a VC 020 Enclosure
WARNING
WARNING
WARNING
WARNING
Camera Accessories Installation and Administration Guide
Fragen zu dem Produkt? Kein Problem - wir helfen Ihnen per eMail (info@diskontcomputer.com) gerne weiter!
Den aktuellen Preis und Lagerstand finden Sie online auf http://www.diskontcomputer.com/detail.php?item=599647
Preparing the Brackets
This procedure describes how to connect the mounting bracket and the enclosure
bracket.
Using the L-type hex wrench, adjust the ball joint in the enclosure bracket to set
STEP 1
the approximate direction the enclosure.
Place the wall mount bracket and the enclosure bracket together.
STEP 2
Screw the brackets together using the provided stainless steel screw and L-type
STEP 3
hex wrench.
Connecting the Cables
Before completing this procedure, you must cut the camera's Ethernet cable and
the power cord as it will be necessary to feed them through the mounting
brackets and the cable conduits found on the bottom of the enclosure.
Equipment connected to outdoor cameras must be permanently grounded in
accordance with national and local codes. Statement 374
Hazardous voltages may be present in the outdoor camera cables under fault
conditions. Disconnect all cables from the outdoor cameras before servicing this
equipment. Statement 376
Do not use this product near water; for example, near a bath tub, wash bowl, kitchen
sink or laundry tub, in a wet basement, or near a swimming pool. Statement 1035
Never install telephone jacks in wet locations unless the jack is specifically
designed for wet locations. Statement 1036
DC diskontcomputer.com GmbH
Traunuferstrasse 110
4052 Ansfelden, Austria
2
23
Advertisement
Table of Contents
