:: Seite 52 von 64 :: Datenblatt zum Produkt Cisco CISCO VC020 Kameragehaeuse fuer Cisco SB Kamera PVC2300 mit DC# 599647 ::
Accessory Installation Processes
Installing the VC220 Cameras in a VC 025 Enclosure
Camera Accessories Installation and Administration Guide
Fragen zu dem Produkt? Kein Problem - wir helfen Ihnen per eMail (info@diskontcomputer.com) gerne weiter!
Den aktuellen Preis und Lagerstand finden Sie online auf http://www.diskontcomputer.com/detail.php?item=599647
If a dome cover is attached to the camera, remove the two screws with the
STEP 1
provided TORX
™
Use the provided TORX
STEP 2
enclosure cover to the base and lift the enclosure cover off the base.
Place the camera into the base, aligning the bottom of the camera with the raised
STEP 3
base of the enclosure.
TIP
Temporarily place the enclosure cover back on to make sure the Status LED comes
through the opening in the enclosure.
screwdriver, and then detach the dome cover.
screwdriver to loosen the four screws that attach the
™
DC diskontcomputer.com GmbH
Traunuferstrasse 110
4052 Ansfelden, Austria
2
52