Cisco PVC300 Installation And Administration Manual page 26

:: Seite 26 von 64 :: Datenblatt zum Produkt Cisco CISCO VC020 Kameragehaeuse fuer Cisco SB Kamera PVC2300 mit DC# 599647 ::
Accessory Installation Processes
Installing the PVC2300/WVC2300 Cameras in a VC 020 Enclosure
WARNING
WARNING
WARNING
WARNING
WARNING
Camera Accessories Installation and Administration Guide
Fragen zu dem Produkt? Kein Problem - wir helfen Ihnen per eMail (info@diskontcomputer.com) gerne weiter!
Den aktuellen Preis und Lagerstand finden Sie online auf http://www.diskontcomputer.com/detail.php?item=599647
Connect the power cord to the terminal block assembly. You can make these
STEP 5
connections in one of two ways: color matching the wires, or using a multimeter to
measure resistance from the power cord and the terminal block assembly.
This equipment has been designed for connection to TN and IT power systems.
Statement 1007
This equipment must be grounded. Never defeat the ground conductor or operate
the equipment in the absence of a suitably installed ground conductor. Contact the
appropriate electrical inspection authority or an electrician if you are uncertain that
suitable grounding is available. Statement 1024
When installing or replacing the unit, the ground connection must always be made
first and disconnected last. Statement 1046
Use copper conductors only. Statement 1025
The ground connection from the power cable MUST connect to the chassis first.
The power cord ground wire must connect to the chassis ground terminal first. A
closed loop connector must be attached to the ground and then attached to the
screw and lock washer at the protective earth ground (PE).
DC diskontcomputer.com GmbH
Traunuferstrasse 110
4052 Ansfelden, Austria
2
26