Table of Contents
Advertisement
Insert the drain h ose into a drain pipe with a m inim um diam eter of 40mm , or let it run into the sink, making sure to
avoid bendin g or crim ping it. The top of the ho se m ust be less than 100 0mm.
NOTE
The top of the hose
must be less than
1000mm.
C onnect the cold water supply hose to a threaded 3/4(inch) connector and make sure
that it is fastened tightly in place.
If the water pipes are new or have not been used for an extended period of time, let the
w ater run to make sure that the water is clear. This precaution is needed to avoid the
risk of the water in let to be blocked and damage the a ppliance.
Ple ase close the hydrant after u sing.
Front
Drain pipe
A
B
φ 40mm
Counter
Advertisement
Table of Contents
