Siemens SIMATIC PCS 7 Service Manual page 129

Overview
Information on
Diagnosing hard‐
ware
Module Informa‐
tion
Operating mode
Time
Faults on PROFI‐
BUS
All installed licen‐
ses
(license keys and
authorization ver‐
sions of installed
components)
Service Support and Diagnostics (V8.2)
Service Manual, 03/2016, A5E36200111-AA
Detailed information
Quick view: icons indicate
operating status or module
status.
Use this menu command to
read out information on the
selected module.
Displays the operating mode
of the current module (RUN,
STOP).
This requires an online con‐
nection to the CPU.
Checks/sets time of day
● Faulty bus segment
● Distance of an error
location from the
diagnostics repeater
● Products (name,
version, release)
● Components (name,
version, release)
● Firmware updates
● DLLs (STEP 7‑DLLs,
Windows DLLs)
Called via
PLC > Diagnostics/Set‐
ting > Hardware Diag‐
nostics
Then, Module Informa‐
tion > Update: F5‑key
Select CPU or CP: PLC
> Module information
Select CPU or CP: PLC
> Module information
Select CPU: PLC > Di‐
agnostics/Setting > Set
Time of Day
Select master system:
PLC > PROFIBUS
Node Diagnostics, Mon‐
itor/Modify Node
Help > About > "Display"
button
Diagnostics in PCS 7
8.18 Diagnostic tools
Additional information
STEP 7 ,
Online help for
topic: "Hardware diag‐
nostics and trouble‐
shooting"
You can find information
on this in the section
"Module information
(Page 131)".
Additional information:
Double-click on the icon
STEP 7 ,
Online help for
topic: "Hardware diag‐
nostics and trouble‐
shooting"
You can find information
on this in the section
"Module information
(Page 131)".
STEP 7 ,
Online help for
topics "CPU Clocks with
Time Zone Setting and
Summer/Winter Time"
and "Using the Clock
Functions"
STEP 7 ,
Online help for
topic "Topology display
using diagnostics re‐
peaters"
STEP 7 ,
Online help for
topic "Installed SIMATIC
software"
129