Power Supply Status - Cisco 2332TQ Hardware Installation Manual

Appendix E LEDs
Table E-1
Component
Power supply
(port side exhaust
of chassis)
Port LED
For a description of the two power supply status, see the

Power Supply Status

This section describes the power supply LED indicators for the Cisco Nexus Fabric Extenders.
describes the status indicated by the Cisco Nexus 2332TQ, Cisco Nexus 2348TQ, Cisco Nexus
2348TQ-E, Cisco Nexus 2348UPQ, Cisco Nexus 2248TP-E, Cisco Nexus 2248TP, 2232PP, and 2224TP
power supply LEDs.
LEDs.
Table E-2
Condition
No AC power to the power supplies
Power supply failure (includes
overvoltage, overcurrent,
overtemperature, and fan failure)
Power supply warning events where the
power supply continues to operate
(high temperature, high power, and
slow fan)
AC present /voltage standby (VSB) on,
and power supply unit off
Power supply On and OK
LEDs for the Cisco Nexus Fabric Extenders (continued)
LED
OK (green)
FAULT (amber)
Indicates LED
status
Table E-3 describes the status indicated by the Cisco Nexus 2148T power supply
Power Supply LED Indicators for the Cisco Nexus 2332TQ, 2348TQ-E/TQ
2248TP-E/TP, 2232PP, and 2224TP
OK LED Status (Green)
Off
Off
Off
blinking
On
Chassis and Module LEDs for the Cisco Nexus Fabric Extenders
Status Description
Solid on Power supply is on and okay.
Blinking 12 voltage standby (VSB) is on but the power
supply unit is not powering the other modules.
Off No AC power to the power supply.
Solid on Power supply failures, over-voltage,
over-current, or over temperature has occurred.
Blinking AC is present, 12 VSB on, and the power supply
is off.
Off Operating normally.
Off The port is not active or the link is not connected.
Solid on The port is active. The link is connected and
(green) operational.
Solid on The module or port is disabled through the CLI
(amber) command or the module is initializing.
Blinking The port is faulty and has been disabled.
(amber)
"Power Supply Status" section on page
Cisco Nexus 2000 Series Hardware Installation Guide
E-3.
Table E-2
, ,
2348UPQ
FAIL LED Status (Amber)
Off
On
1 blinking
Off
Off
E-3