Connecting A Cisco Nexus Fabric Extender - Cisco 2332TQ Hardware Installation Manual

Connecting a Cisco Nexus Fabric Extender

This chapter describes how to connect the ports on a Cisco Nexus Fabric Extender (FEX).
When running power and data cables in overhead or subfloor cable trays, we strongly recommend that
Caution
you have power cables and other potential noise sources as far away as practical from network cabling
that terminates on Cisco equipment. In situations where long parallel cable runs cannot be separated by
at least 3.3 feet (1 m), we recommend that you shield any potential noise sources by housing them in a
grounded metallic conduit.
This chapter includes the following sections:
Preparing for Network Connections, page 3-2
•
Connecting to the 1-Gigabit Ethernet Port, page 3-2
•
Connecting to a 10-Gigabit and 40-Gigabit Ethernet Port, page 3-2
•
C H A P T E R
Cisco Nexus 2000 Series Hardware Installation Guide
3
3-1