Table of Contents
Advertisement
Step 3: 3G Status Con rmation
1. Make sure the
Power
indicator will be
solid green
Wait 90 minutes.
complete system con guration and 3G service activation. Do not turn o power or disconnect.
Note: The
2. After 90 minutes, look at your 3G MicroCell front panel status indicators.
*
If the Power or Ethernet status indicators are not solid green, see the Troubleshooting section on page 14 for more
information.
3G Status Indicator Still Flashing after 90 Minutes?
Try these steps in this order:
1. Con rm that at least
2.
Power cycle
your 3G MicroCell. (Unplug the power adapter from the wall outlet, wait 10 seconds, then plug it back in.)
Wait 30 minutes
3. If power cycling doesn't resolve the problem, see
provide a solution.
4. If your 3G status indicator still
Customer Support at
12
and
Ethernet
status indicators are
or
ashing green
You have completed your part. Relax and give your 3G MicroCell time to
GPS
and
3G
status indicators will start
3G Status Con rmation
*
Power
Solid Green
*
Ethernet
Solid Green
A
GPS
Solid Green
A
Computer
Option A: O
Option B: Solid Green or Flashing Green (during Data Transfer)
3G
Solid Green
90 minutes
have passed since rst powering up the 3G MicroCell.
for 3G indicator to go
solid green
fails to go solid green, see the
1.800.768.1212
solid green
*. If you chose Option B, the
during data transfer.
ashing green within 10 minutes
.
Option C on page 11
Troubleshooting section on page 14
Computer
.
• If the 3G status indicator is
3G activation is complete. You may
advance to
Step 4: Final Con rmation
• If the 3G status indicator is
after 90 minutes
, refer to the steps
below for solutions to try.
for an alternative cabling con guration that may
status
solid green
,
.
still ashing
, or contact TruVista
Advertisement
Table of Contents
