Appendix - Cisco 2332TQ Hardware Installation Manual

Cabinet and Rack Installation
This appendix provides the requirements for cabinet and rack installation and includes the following
sections:
•
•
Cabinet and Rack Requirements
This section provides the requirements for the following types of cabinets and racks, assuming an
external ambient air temperature range of 0 to 104
•
•
•
If you are selecting an enclosed cabinet, we recommend one of the thermally validated types, either
Note
standard perforated or solid-walled with a fan tray.
Do not use racks that have obstructions (such as power strips), because the obstructions could impair
Note
access to field-replaceable units (FRUs).
This section includes the following topics:
•
•
•
General Requirements for Cabinets and Racks
The cabinet or rack must be one of the following types:
•
Cabinet and Rack Requirements, page A-1
Cable Management Guidelines, page A-3
Standard perforated cabinets
Solid-walled cabinets with a roof fan tray (bottom to top cooling)
Standard open racks
General Requirements for Cabinets and Racks, page A-1
Requirements Specific to Perforated Cabinets, page A-2
Requirements Specific to Standard Open Racks, page A-2
Standard 19-in. (48.3 cm) (four-post EIA cabinet or rack, with mounting rails that conform to
English universal hole spacing per section 1 of ANSI/EIA-310-D-1992). See the
Specific to Perforated Cabinets" section on page
A P P E N D I X
o o
F (0 to 40 C):
A-2.
Cisco Nexus 2000 Series Hardware Installation Guide
A
"Requirements
A-1