Maintaining Sfp+ Transceivers And Cables - Cisco 2332TQ Hardware Installation Manual

Connecting to a 10-Gigabit and 40-Gigabit Ethernet Port

Maintaining SFP+ Transceivers and Cables

You must keep SFP+ transceivers clean and dust free to maintain high signal accuracy and prevent
damage to the connectors. Attenuation (loss of light) is increased by contamination and should be below
0.35 dB.
Follow these maintenance guidelines:
•
•
•
•
•
•
Cisco Nexus 2000 Series Hardware Installation Guide
3-6
SFP+ transceivers are static sensitive. To prevent ESD damage, wear an ESD-preventive wrist strap
that is connected to the chassis.
Do not remove and insert a transceiver more often than is necessary. Repeated removals and
insertions can shorten its life.
Keep all optical connections covered when not in use. If they become dusty, clean before using to
prevent dust from scratching the fiber-optic cable ends.
Do not touch ends of connectors to prevent fingerprints and other contamination.
Clean regularly; the required frequency of cleaning depends upon the environment. In addition,
clean connectors if they are exposed to dust or accidentally touched. Both wet and dry cleaning
techniques can be effective; refer to your site's fiber-optic connection cleaning procedure.
Inspect routinely for dust and damage. If damage is suspected, clean and then inspect fiber ends
under a microscope to determine if damage has occurred.
Chapter 3 Connecting a Cisco Nexus Fabric Extender