Microcell Status - Cisco 3G MicroCell User Manual

MicroCell Status

This table and diagram identify the status indicators on the 3G MicroCell front panel and describe their operation.
Status
Color/State
Indicator
Red/Steady
Power
Green/Steady
Green/Flashing
Ethernet
(Broadband
Green/Steady
Connection)
Green/Flashing
GPS
Green/Steady
Green/Flashing
PC
(PC/Router
Green/Steady
Connection)
Green/Flashing
3G
(MicroCell
Red/Flashing
Connection)
Green/Steady
*
If any condition marked with an asterisk persists after 20 minutes, see Troubleshooting on page 15 for additional information.
4030453_RevA_6.75x8.25_Mar6.indd 13 4030453_RevA_6.75x8.25_Mar6.indd 13
Description
Off No power.
MicroCell fault has
occurred.
Power is on and there
are no faults.
Off No connection.
Physical connection
*
but no IP address.
AT&T network
connection.
Initial state. This
state lasts for several
Off
minutes after power is
connected.
Searching for GPS signal
and/or location fix. This
*
follows the initial state.
Location fix acquired.
Off No connection.
Ethernet link, passing
*
traffic.
Ethernet link, no traffic.
Off No configuration.
Initialization is in
process. Flashes may
*
be short or medium in
length.
Fault condition(s) present
*
that impact service.
MicroCell service
available.
Power
Ethernet
GPS
PC
3G
T14082
13
3/6/2009 5:43:34 PM 3/6/2009 5:43:34 PM