Exposure Settings; Setting Up Your Housing; Opening The Housing - Ikelite 200DLM/A Instruction Manual

Underwater ttl housing for olympus om-d e-m5 mark ii mirrorless micro four-thirds cameras

Hide thumbs Also See for 200DLM/A:

Table of Contents

•

X-Sync.

Set

•

Flash

Set

Exposure Settings

Refer to the

for recommendations on exposure settings for a wide variety of

shooting situations:

https://www.ikelite.com/blogs/cheat-sheets

1. Push the lid snap lock forward and lift the curved end away from

the housing.

2. Lid snaps are designed to provide enough force to compress the

o-ring for a proper seal. Keep firm pressure against the lid snap

while lifting it away.

3. Repeat with opposite lid snap.

4. Remove the housing back.

to "1/250" when using an external strobe.

to "Fill In" when using an external strobe.

Cheat Sheets

in the Photo School section of our website

Lock

Table of Contents

6950.52