Cleanlock - WMF 1100S User Manual

CleanLock

™ Touch
CleanLock
A 15-second countdown starts.
The touch display can now be cleaned.
The touch display is activated again 15 seconds after
the last time it was touched.
instructions
Animated instructions about the available cleaning
programs and for installing and removing the coffee
spout, milk hose, mixer system, brewing unit, and
SteamJet.
Filter change
If the filter capacity is exceeded, there will be
a message once per day that a filter change is due.
The filter must be changed within one week; otherwise,
the message will be displayed after every brewing
cycle.
™ Change the filter
™ Confirm filter change
After filter change there is an automatic program
sequence to rinse and bleed the anti-scale filter and
water system. Hot water runs out of the hot water
spout during this process.
Brewer change
If the brewer is replaced, this routine must be
performed.
Descaling
The water hardness, flow rate, and whether a water
filter is used are the factors that determine the number
of litres remaining before descaling is required. This
litres indication is calculated and displayed by the
WMF 1100 S.
User Manual WMF 1100 S
Software | Care
DS_03_04_01_02
Clean the display with a clean, damp
cloth only. Do not use any cleaners
or implements.
DS_03_04_01_03
DS_03_04_01_04
Follow the water filter instructions.
Displays lead step by step through
the program.
Follow the instructions.
DS_03_04_01_05
Brewer change
DS_03_04_01_07
Descaling chapter
w s tarting on page 71
CleanLock
Instructions
Filter change
Descaling
39