After 5 hours, clean all parts thoroughly with
a brush
Rinse all parts very thoroughly with clear drinking
water
Health hazard / hygiene
> The trim strip on the spout can be removed
and cleaned when needed.
Burn hazard / scalding hazard
• The steam nozzle can blow out hot steam
without the milk foamer.
> Never install the steam nozzle without a milk
foamer.
Assemble the milk foamer
Do not grease the parts for assembly, just get them
damp.
Assemble the parts and press them in tightly
Replace the milk foamer in the spout
Clean the milk hose
Immerse one end of the milk hose in the cleaning
solution with the other parts
Immerse the length of the remaining milk hose in
the cleaning solution
This procedure prevents air bubbles from remaining in
the milk hose.
All parts must be completely immersed in the cleaning
solution.
User Manual WMF 1100 S
Care | Manual cleaning
Follow the Safety chapter
w s tarting on page 6
Follow the Safety chapter
w s tarting on page 6
"Cleaning the milk hose" instructions
w I nstructions
page 39
CaUtion
CaUtion
81