WMF 1100S User Manual page 85

™ Clean the individual parts of the dosing auger
thoroughly, using the included cleaning brush
™ Allow powder hopper and individual components to
dry completely
™ Re-assemble and replace the dosing auger and
screw on union nuts
Make sure the discharge cap is in the right
place.
™ Fill the powder hopper and replace the cover
™ Close the lock
powder hopper extension (optional)
™ Unlatch the extension
™ Lift up the extension to remove it
™ Wipe out the extension thoroughly with a damp
cloth and allow to dry
™ Replace the extension and latch it in place
User Manual WMF 1100 S
Care | Manual cleaning
Portioner with individual parts.
Dosing auger
iMportant
85