Maintenance; Cleaning The Exterior Of The Unit; Cleaning The Print Head; Cleaning The Roller - Brother QL-810W User Manual

16

Maintenance

We recommend cleaning your Label Printer on a regular basis to maintain its correct performance.
Note
Always disconnect the AC Adapter before cleaning the Label Printer.

Cleaning the Exterior of the Unit

Wipe any dust and marks from the main unit using a soft, dry cloth.
Use a cloth slightly damp with water on difficult to remove marks.
Note
Do not use paint thinner, benzene, alcohol or any other organic solvent.
These may deform or damage the case of your Label Printer.

Cleaning the Print Head

The DK Roll (thermal recording paper type) used with the machine is designed to clean the print head
automatically. When the DK Roll passes the print head during printing and label feeding, the print head is
cleaned.

Cleaning the Roller

Clean the roller using the Cleaning Sheet (available separately).
The Label Printer contains only one Cleaning Sheet.
Note
When cleaning the roller, be sure to use the Cleaning Sheet supplied exclusively for this Label Printer.
If using other Cleaning Sheets, the surface of the roller may be damaged and may cause a malfunction.
a
Turn off the power to the Label Printer.
b
Hold the DK Roll Compartment Cover at the sides near the front of the Label Printer and firmly lift up to
open the DK Roll Compartment Cover.
16
16
16
16
16
163