P-Touch Template Settings Dialog Box - Brother QL-810W User Manual

Changing the Label Printer Settings

P-touch Template Settings Dialog Box

1 Default Command Mode
Specifies the P-touch Template mode as the default mode.
To change the mode, see the Management Tab on page 57.
2 Default Template Number
Specifies a default template number that the Label Printer sets when it is turned on. If you do not want to
transfer a template to the Label Printer, do not specify a template number.
3 Data Delimiter for P-touch Template
Displays a symbol used to indicate the boundaries between groups of data in a file. Between 1 and 20
characters can be specified.
4 Trigger for P-touch Template Printing
Specifies a trigger to begin printing from a number of options.
[Command Character]: Printing starts when the command character specified here is received.
[Data Insertion into All the Objects]: Printing starts when the delimiter for the last object is received.
[Received Data Size]: Printing starts when the number of characters specified here is received. However,
delimiters are not counted in the number of characters.
5 Character Code Table
Selects one of the following character code sets:
Available settings: [Windows 1252], [Windows 1250 Eastern Europe], [Brother standard]
1
2
3
4
5
6
7
8
9
10
11
12
13 14
15
4
4
60