Advanced Tab - Brother QL-810W User Manual

Changing the Label Printer Settings

Advanced Tab

The following explains about the Advanced Tab in the settings dialog box.
• Print Density (Black)
Sets the density of black.
Available settings: [+6/+5/+4/+3/+2/+1/0/-1/-2/-3/-4/-5/-6]
• Print Density (Red)
Sets the density of red.
Available settings: [+6/+5/+4/+3/+2/+1/0/-1/-2/-3/-4/-5/-6]
• Print Data after Printing
Specifies whether or not print data is erased after printing.
Available settings: [Keep Print Data], [Erase All Print Data]
• Printer Information Report
Selects the information you want to include in the Printer Information Report.
Available settings: [All], [Usage Log], [Printer Settings], [Printer Transfer Data]
• Auto Cut
Sets the cutting method when printing multiple labels.
Available settings: [OFF], [Auto Cut], [Cut at End] (Only cuts the places that have finished printing when
multiple labels are printed.)
• Serialize Mode
Available settings: [Cont From Last] (Select to serialize from the last number printed.), [From Starting]
(Select to serialize from the default number each time you print.)
4
4
55