Rear - Brother QL-810W User Manual

Setting Up the Label Printer

Rear

QL-810W
1 AC Adapter Port
2 USB Port
3 USB Host
4 LAN Port
Important
Before using the Label Printer, make sure you remove the protective sheet according in the following way:
1 Make sure that the Label Printer is turned Off.
Hold the Label Printer by the front, and firmly lift the DK Roll Compartment Cover to open it.
2 Remove the protective sheet from the Label Output Slot.
• Do not throw away the protective sheet.
• When the Label Printer is not in use, lift the DK Roll Compartment Cover and remove any DK Rolls
from inside the Label Printer. Reinsert the protective sheet into the Label Output Slot to maintain good
printing quality.
QL-820NWB
1
2
Protective
sheet
4
2
3
1
1
1
4