Brother QL-810W User Manual page 63

Changing the Label Printer Settings
3 Settings Tabs
Contains settings that may be specified or changed.
Note
If appears in the tab, the settings in that tab cannot be specified or changed. In addition, the settings
in the tab will not be applied to the Label Printer even if [Apply] is clicked. The settings in the tab will also
not be saved or exported when the [Save in Command File] or [Export] command is used.
4 Current Settings
Retrieves the settings from the currently connected Label Printer and displays them in the dialog box.
Settings will also be retrieved for parameters on tabs with
5 Disable these settings
When this check box is selected,
changed.
Settings in a tab where
addition, the settings in the tab will not be saved or exported when the [Save in Command File] or
[Export] command is used.
6 Parameters
Displays the current settings.
7 Exit
Exits [Device Settings] and returns to the main window of the Printer Setting Tool.
8 Apply
Applies the settings to the Label Printer.
To save the specified settings in a command file, select [Save in Command File] from the drop-down list.
The saved command file can be used with the mass storage mode to apply the settings to a Label Printer.
For more information, see Mass Storage Mode (QL-820NWB only) on page 85.
appears in the tab, and the settings can no longer be specified or
appears will not be applied to the Label Printer even if [Apply] is clicked. In
.
4
52