Channelized Line Cards - Cisco ASR 5000 series Product Overview

Technical Specifications
Table 118. SM IR-1 Fiber Interface Transmit and Receive Levels
The fiber-optic SFP interface on OLC and OLC2 Optical ATM Line Cards with the multi-mode interface has one pair of
host connectors as shown in figure that follows.
Figure 234. ATM Line Card Multi-Mode SFP Pin-out
Table 119.

Channelized Line Cards

Channelized Line Cards with Single-mode Interface
The optical SFP interface on the 1-port CLC and 4-port Channelized Line Card with the single-mode interface has one
pair of connectors that receive SFP transceivers, as shown in the following figure.
OL-22938-02
Signal Level
Max TX: -8 dBm
Min TX: -15 dBm
Max RX: -8 dBm (saturation average power)
Min RX: -28 (max) dBm (sensitivity average power)
Multi-Mode Fiber Interface Transmit and Receive Levels
Signal Level
Max TX: -14 dBm
Min TX: -19 dBm
Max RX: -12 dBm (saturation average power)
Min RX: -30 (max) dBm (sensitivity average power)
Interface Specifications ▀
Cisco ASR 5000 Series Product Overview ▄