Interface Specifications - Cisco ASR 5000 series Product Overview

▀ Interface Specifications

Interface Specifications
Following is a list of interfaces for use within the chassis. Each interface is shown with its specific pin-out.
Important:
pin-out configuration, depending on the type of cable used.
SPIO Card Interfaces
Each interface on the SPIO card is described below. In each accompanying figure, the interface is shown in the same
orientation as the way it appears on the card.
Console Port Interface
The system's console port is an RJ-45 RS-232 interface used to access the command line interface. The interface
communicates at a baud rate of 9600 to 115,200 bps (115.2 Kbps). The default is 115,200 bps.
The interface's pin out detail is provided in the following figure and table.
Figure 218. SPIO Console Port Pin-out
Table 105. SPIO Console Port Pin-out
▄ Cisco ASR 5000 Series Product Overview
Some interfaces, such as an RJ-45 interface used for Ethernet connectivity, may have more than one
Pin Signal Description
1 Clear to Send (CTS)
2 Data set Ready (DSR)
3 Receive Data (RX)
4 Signal Ground (SGND)
5 Ready to Send (RTS)
Signal Type
Input
Input
Input
N/A
Output
Technical Specifications
OL-22938-02