Quicksilver 605PH — System & Component Overview and Operation
Starboard Jump Seat
17. Cockpit Bench Seat
The cockpit bench seat increases the seating area by creating a continuous back bench at the aft end
of the boat. When installed, the bench seat covers the motorwell, however, it does not interfere
with normal operation and trimming of the engine. If you want to trim the engine to trailer position,
the seat will rotate forward. Simply pull the seat back forward and it will move out of the way.
Cockpit Bench Seat
Before using, verify that the jump seat is properly installed
Before trimming the engine to trailer mode, make sure that
the back bench filler is rotated forward. Failure to do so
could cause damage to the engine and bench seat.
30
Seat base
Seat cushion
Cockpit bench seat