Back Bench Filler Seat (Optional); Sun Lounge (Optional) - Quicksilver 555 Cabin Owner's Manual

Table of Contents

Quicksilver 555CAB — System & Component Overview and Operation

Interior Table

13. Back Bench Filler Seat (optional)

An optional back bench filler seat is available to increase the seating area in the cockpit by creating a

continuous back bench at the aft end of the boat. When installed, the back bench filler covers the

motorwell, however, it does not interfere with normal operation and trimming of the engine. If you

want to trim the engine to trailer position or use the boarding ladder, the seat will rotate forward.

Simply pull the upper bar on the seat frame forward and the seat will move out of the way.

Back Bench Filler Seat

Back Bench Filler Seat in "lounge" position

As an option, your boat may be equipped with a sun lounge. The sun lounge consists of a single

fiberglass panel and a cushion. To use the lounge, remove the single cushion from the back bench

seat. Next, rotate the sun lounge panel forward 180 degrees. Finally, install the sun lounge cushions.

Before trimming the engine to trailer mode, make sure that

the back bench filler is rotated forward. Failure to do so

could cause damage to the engine and bench seat.

Table base

Table leg

Interior table

Back bench filler seat

Upper handle bar

Back Bench Filler Seat rotated forward

Table of Contents