Center Aft Bench Seat Backrest; Helm Seat Configurations - Quicksilver Activ 505 Open Owner's Manual

Quicksilver 505OP — System & Component Overview and Operation

11. Center Aft Bench Seat Backrest

Located on the aft bench seat, the center backrest can be rotated forward so that the engine can be
raised to "trailer" position. To rotate, simply unlatch the backrest and flip it forward.
Aft bench seat back
Before trimming the engine to trailer mode, make sure that
the back bench backrest is rotated forward. Failure to do so
could cause damage to the engine and bench seat.

12. Helm Seat Configurations

The helm bench seat has an articulating support bar that allows for multiple seating configurations.
With the support bar located in the aft position, you can comfortably sit while operating the boat. By
rotating the support bar to the center position, you can now operate the boat in a standing position
and use the support bar as a bolster to lean on. Finally, by rotating the support bar to the forward
position, you can comfortably sit at the helm seat facing aft while the boat is at rest.
Helm Seat Positions
Facing forward
Do not operate the boat with the center aft bench seat
backrest rotated forward. Failure to do this could lead to
injury or death from falling overboard.
Center position
23
Back bench seat back
Latches
Facing aft