Chapter 2: Cartridge Change Cleaning
Cartridge Change Cleaning
FOLLOW THESE STEPS BEFORE INSERTING A NEW PRODUCT CARTRIDGE
Step
Remove the Product Cartridge(s) from the Product Tower.
1.
Carefully clean the IPN connector(s) with a clean cloth dipped in Sanitizer until the cloth
2.
comes away clean.
Clean the Tray(s) with a clean Cloth dipped in Sanitizer until the Cloth comes away
clean. If necessary, you may wash the Tray(s) in the sink with detergent cleanser
3.
before cleaning it with Sanitizer. Set the Tray(s) on a sanitary surface to dry.
Wait 5 minutes to allow the Sanitizer to work and the IPN(s) to air dry.
4.
Perform Steps 2 through 4 again.
5.
Page 2 of 28
Action
Chapter
2
CCFS2000 Cleaning