Emerson Machinery Health CSI 6500 Quick Start Manual page 2

Product Service Centers
America
Emerson Process Management
835 Innovation Drive
Knoxville, TN 37932
Tel: 865-675-2110
Fax: 865-218-1401
Brazil
Emerson Process Management Ltd.
Av Hollingsworth 325
Sorocaba, SP
BRAZIL 18087-000
Phone: 55 15 2383788
Fax: 55 15 22823300
Europe
Emerson Akciova Spolocnost - div. ESAD
MHM Repair Center
Piestanka 1202/44
915 28 Nove Mesto nad Vahom
Slowakia
Tel: +421/32/7700.641
Fax: +421/32/7700.884
Asia
Emerson Process Management / Asia
Pacific Private Ltd.
3904 Room Central Plaza
18 Harbour Road Wan-Chai
Hong Kong
Tel: 852-2802-9223
Fax: 852-2802-8227
Incoming goods inspection
Check the content of the shipment to ensure that it is
complete, visibly inspect the goods to determine if the
device may possibly have been damaged during trans­
port. The following parts are included in the scope of
delivery and must be contained in the shipment.
1. Software CD
2. Product information
3. USB to serial (RS232) converter incl 0.7m USB cable
4. Serial connection cable (9-pole Sub-D to PS2)
5. 2pc Subclic SMB cable 3m
6. 2pc SMB to BNC Adapter
If the contents are incomplete, or if any defects are
observed, a complaint must be filed with the carrier
immediately. Moreover, the responsible Field Sales
Office (FSO) must be informed to enable repair or re­
placement of the device. Repairs or calibration that
may be required, are only possible at epro GmbH (part
of Emerson Process management group).
In this case, a non-detachable tag with customer
name, defect observed and version of the A 6910 con­
figuration software must be attached to the device.
Repair and maintenance
Repair or calibration of monitors is only possible at
factory.