ADJ Encore Profile 1000 Color User Instructions page 8

Encore Profile 1000 Color
The ADJ LED RC2 infrared remote (sold seperately) has many dif-
fernet functions to control your Encore Profile 1000 Color. To control
the fixture you must aim the controller at the infrared sensor and be
no more the 30 feet away. To use the ADJ LED RC2 you must first
activate the fixtures infrared sensor, to activate the sensor please see
the instructions on pages 10-11.
BLACkOUT - Pressing this button will blackout the fixture.
SELECT PROG - Pressing this button will cycle through static color
mode, color change mode, color fade mode, and auto run mode.
Each press of this button will change to the next mode. When you
found your desired mode use the "+" or "-" to scroll through the pro-
grams or static colors. When in either color fade, or color change
mode, press the Speed button and use the "+" or "-" to adjust the
running speed. When in static color mode, press the Flash button to
activate strobe and use the "+" or "-" to adjust the strobe speed.
FLASH - This button will activate the strobe effect. You can control
the flash rate by pressing the "+" and "-" buttons. Press this button
again to exit strobe mode.
SPEED - Press this button and use the "+" & "-" buttons to adjust the
speed of the color change mode, color fade mode, and auto run.
DMX MODE - This button will cycle between DMX addressing, DMX
channel mode, and dimmer curve selection. Some fixtures will come
with different DMX channel modes. This button will switch between
the different modes. Please see pages 16-22 for DMX modes, values,
and traits.
SLAVE/SOUND ACTIVE - This designates the fixture as a slave fix-
ture in a master/slave configuration. Sound activity is invalid for this
fixture.
SET ADDRESS - Press this button to set the DMX address. Press
this button first, then press the numbers to set the address. If the
address is correctly set, all LED's will flash and the unit will automati-
cally go into DMX mode.
Example: Set DMX Address 1 Press "S-0-0-1"
Set DMX Address 245 Press "S-2-4-5"
ADJ Products, LLC - www.adj.com - Encore Profile 1000 Color User Manual Page 14
ADJ LED RC2 Operation Encore Profile 1000 Color
R G B W - Press either one of these buttons and the press the "+"
or "-" to adjust the brightness. Press the FLASH button to activate
strobing and use the "+" or "-" to adjust the flash speed.
"+" and "-" - These buttons adjust the flash rate and speed of the
color change mode, color fade mode, and auto run. When in color
change or color fade mode they are used to find your desired pro-
gram. See color change mode and color fade mode on page 8.
DMX Mode:
Operating through a DMX controller gives the user the freedom to
create their own programs tailored to their own individual needs.
Follow the directions below to set your DMX address and DMX chan-
nel mode.
1. Before connecting to a DMX controller, your fixture has different
DMX channel modes, please select your desired mode by press-
ing the DMX Mode button, then using the "+" or "-" buttons to
scroll through the DMX channel modes. Set the mode before you
address the fixture. See the bottom of this page for the different
DMX modes.
2. After you have selected your mode, set the DMX address for the
fixture by pressing the "S" button. When the "S" button is pressed
the LED's will flash 2-3 times. Use the number buttons to press in
your desired address. See "SET ADDRESS" on page 13 for
examples.
Note: When seeting the DMX address each time a number is pressed
a LED color will flash, when you have set the DMX address correctly
all LED's will flash 2-3 times.
3. Now you may connect the fixture via the XLR connections to any
standard DMX controller. Please see pages 17-23 to for a detailed
descriptions of the DMX modes, values, and traits.
• If the Red LED flashes you are in 4 Channel Mode.
• If the Green LED flashes you are in 5 Channel Mode.
• If the Blue LED flashes you are in 6 Channel Mode.
• If the White LED flashes you are in 10 Channel Mode.
• If the Red & Green LED's flash you are in 11 Channel Mode.
ADJ Products, LLC - www.adj.com - Encore Profile 1000 Color User Manual Page 15
ADJ LED RC2 Operation