Adjusting Air Flow Direction - York HVHC 07-12DS Installation & Owner's Manual

ADJUSTING AIR FLOW DIRECTION

Lever
J190
• Adjust the air flow direction properly otherwise, it might cause
discomfort or cause uneven room temperatures.
• Adjust the horizontal louver using the remote controller.
• Adjust the vertical louver manually.
Adjusting the Vertical Air Flow Direction (up - down)
The air conditioner automatically adjusts the vertical air flow direction
in accordance with the operating mode.
To set the vertical air flow direction
Perform this function while the unit is in operation.
Keep pressing the AIR DIRECTION button on the remote controller to
move the louver to the desired direction.
• Adjust the vertical air flow direction to the desired direction.
• In subsequent operations, the vertical air flow is automatically set in
the direction to which you adjusted the louver by pressing the AIR
DIRECTION button.
To set the horizontal air flow direction (left - right)
Adjust the vertical louver manually using the lever on the left or right
side of the vertical louver arm (Depending on model). Take care not to
catch fingers on the fan, horizontal louver or to damage vertical louvers.
When the air conditioner is in operation and the horizontal louver is in
a specific position, move the lever at left (or right, depending on model)
end of the air outlet to the desired position.
To automatically swing the air flow direction (up - down)
Perform this function while the air conditioner is in operation.
• Press the SWING button on the remote controller.
• To stop the function, press the SWING button again.
Press AIR DIRECTION button to lock louver in desired position.
7
ENGLISH
2/03/2005, 4:55 AM
EN
7