Clean Spills; Clean The Instrument - Hach SL1000 Basic User Manual

Chemical exposure hazard. Dispose of chemicals and wastes in accordance with local, regional and
national regulations.

Clean spills

Chemical exposure hazard. Dispose of chemicals and wastes in accordance with local, regional and
national regulations.
1. Obey all facility safety protocols for spill control.
2. Discard the waste according to applicable regulations.

Clean the instrument

Clean the exterior of the instrument with a moist cloth and a mild soap solution and then wipe the
instrument dry.
Charge or replace the battery
Charge the battery when the battery power level is low. Replace the battery when the battery does
not hold a charge. Only use the specified battery supplied by the manufacturer. Refer to
battery on page 7 and
Prepare for shipping
Potential instrument damage. Drain all water from the unit before shipment to prevent damage from freezing
temperatures.
Contact technical support for instructions before the shipment to the manufacturer.
• Clean and decontaminate the instrument before shipping.
• Ship the instrument with the battery installed in the meter, but make sure that the battery is not
connected to the connector.
• Disconnect the probes and remove the Chemkeys before shipping.
• Ship the instrument in the original packaging or ship the instrument in an alternative safe
packaging.
Replacement parts and accessories
N O T I C E
C A U T I O N
C A U T I O N
on page 21.
Install the
English 17