Table of Contents
Advertisement
Preparation for use and operation
Only use modules designed for your notebook.
!
Do not use force when installing or removing the module.
Make sure that no foreign objects enter the slots.
Before removing a notebook battery:
switch off the notebook. You can leave the notebook on provided the notebook battery in the
left slot is not the notebook's only power source.
Place the notebook on a flat surface.
Disk drives can also be removed or installed while in operation (but not when the disk
i
drive is being accessed).
Removing notebook battery/drive
Push the release slide on the underside of the notebook inward (1).
Pull the module out of the slot (2).
Installing notebook battery/drive
Place the module in the slide-in module with the connection contacts first and the sticker facing
upward.
The CD-ROM drive and DVD drive can only be operated in the right slot.
!
Push the module into the slot until you feel it locking into place.
26
2
1
The notebook battery
A26391-K82-Z101-3-7619
Advertisement
Table of Contents
