Preparation for use and operation
Switching on the notebook
Press the release button (1) and unfold the display upwards (2).
Press the ON/OFF switch (3) for roughly one second.
You must not switch off or warm-boot your notebook during this initial installation.
!
When you switch on your notebook for the first time the supplied software is set up and
i
configured. Please follow the instructions on the screen.
If you want to partition your hard disk, please refer to chapter
contents under Windows
If you have assigned a password, you must enter this when requested to do so, in order
to start the operating system.
Once you have installed the operating system and have generally familiarized yourself
with the notebook, you should perform the battery learning cycle (see
notebook
Notes on Windows
The license number for Windows is printed on the front cover of the Windows manual supplied.
14
2
9x".
batteries").
3
1
Switching on the notebook
"Restoring the hard disk
"Learning cycle for
A26391-K82-Z101-3-7619